Cross-strait LED industry calls for creating brand names

A few days ago, the LED bridge meeting was held on both sides of the strait, completing the "cross-strait technical cooperation and pilot demonstration", "LED lighting technical specifications and common standards" and "Shanxi lighting application technology research and results demonstration, and Harbin cold semiconductor lighting reliability research and results The signing of the three letters of intent for the demonstration.

The cross-strait LED industry bridge meeting has made breakthrough progress. The mainland will unite Taiwan, India, Russia and other countries to unify LED lighting standards and specifications. At this meeting, the pilot cities for cross-strait LEDs were further expanded. At the same time, people from both sides of the strait have reached a consensus on establishing a cross-strait LED common brand. It is expected that Taiwan-related agencies will further discuss the mainland in September.

Lu Wei, deputy director of the Energy Conservation and Emission Reduction Division of the National Development and Reform Commission, said that from July this year, the mainland first banned the import, production and sale of high-power incandescent lamps, and then banned the promotion of low-power incandescent lamps. By 2015, we will conduct a final evaluation. If the effect is good, the mainland will ban the import and sale of incandescent lamps of 15 watts or more from October 2016.

Representatives from Taiwan’s public opinion said that the above-mentioned major measures will re-shuffle the mainland lighting market. Therefore, if the mainland is implemented as scheduled, it is expected to bring a favorable development foundation to the LED lighting industry in Taiwan. The cross-strait LED industry is expected to deepen to equity cooperation from the technical cooperation of the bridge plan, and through the joint venture into the LED lighting industry of both parties, it is expected to jointly create a brand, similar to the "Zhonghua" lighting products.

Wu Ling, secretary-general of the National Semiconductor Lighting Engineering R&D Alliance, pointed out that after signing three cooperation letters of intent on the two sides of the strait, the cross-strait LED industry is considered a family. I hope that Taiwan’s technological advantages, mainland lighting capabilities, and brand creation will be a fast-rising LED lighting. The business opportunity, together to attack the global LED lighting commanding heights, is expected to have preliminary results before the end of this year.

Please choose the exactly model LCD for your iPhone. USE to replace faulty,defective,cracked,dead iPhone 5/5S/5C display screen full assembly. Professional instructions will save your much time to replace your old screen easily.

Notice: You need to transfer home button with fingerprint sensor,front camera, ear speaker and silver metal plate from your old iPhone.


Installation Notice:
1. Choose the RIGHT model and color
2. Make sure already disconnect battery cable or power off before installation. It could save your phone from short circuit or incorrect installation damage.
3. Please check the LCD and make sure the flex cable is in good condition and there is no debris on the connector.
4. The flex cable are very sensitive and frangible. DO NOT over-bend or use excessive force to tear it, Handle Carefully !
5. There are many screws when you replacing the assembly which are different in size and length. Make sure each screw are installed back to its ORIGINAL hole
6. Follow the Operation Guide or video online step by step if you are Beginner(also easy to install)

iPhone 5/5S/5C LCD Digitizer

IPhone 5 LCD Display,IPhone 5 LCD Display Touch Screen,IPhone 5 LCD

Shenzhen Aokal Technology Co., Ltd. , https://www.aokal.com