Temperature Requirements for Dongguan Industrial Ovens Are Also Very Important

Dongguan industrial ovens are widely used in various industries for drying materials and are essential equipment in many manufacturing processes. When purchasing an industrial oven, it's crucial to understand the temperature requirements. Here’s a brief guide on what to consider.

It's recommended to choose an oven with a temperature range that is 10 degrees higher than the actual usage temperature. Based on your process needs, calculate the required temperature difference to ensure optimal baking performance. For example, if your process requires temperatures of 150°C, 220°C, 360°C, and 440°C, you should select an oven with a maximum design temperature of 500°C. If you're using the same product across multiple temperatures, a thyristor control system is ideal. The radiant heat at 20 cm from the heated wall is only a quarter of that at 10 cm, which shows how important placement is.

For different products, especially those used at lower temperatures, the temperature difference can be slightly larger. If you need 150°C and 220°C, a low-temperature oven would be more suitable. However, if you use a medium-temperature oven rated up to 500°C, the temperature difference for 150°C could be 2–5°C higher compared to a dedicated low-temperature oven. The quality of the oven also plays a key role. Dongguan industrial ovens are typically categorized as low temperature (0–250°C), medium temperature (250–600°C), and high temperature (600–1500°C). It's best to choose carbon silicon rod heating based on your specific process requirements.

When a new oven is purchased or has been in long-term use, it's advisable to pre-bake it at a low temperature of 80–100°C for two hours before starting the main heating cycle. This helps remove moisture, improve insulation performance, and extend the lifespan of the porcelain components. The temperature probe should be inserted into the working chamber through the temperature measurement hole on the left side, not from the center hole on the top cover, to avoid affecting the accuracy of the readings.

Proper maintenance and correct usage are essential for ensuring the efficiency and longevity of your Dongguan industrial oven. Always follow the manufacturer's guidelines and adjust the settings according to your specific application needs.