Carbon Fiber FPV Drone Frame,FPV Drone TrueX Frame,Carbon Fiber FPV Frame Jiangsu Yunbo Intelligent Technology Co., Ltd , https://www.fmodel-ai.com
Mark4 V2 Mark4 7inch 295mm / 8inch 367mm / 9inch 387mm / 10inch 427mm 3K Full Carbon Fiber TrueX Frame for FPV Camera Kit Done:
How to do capacity test for é• nickel battery pack?
The valve-regulated lead-acid battery pack is charged and discharged at a constant current, with both the charging and discharging currents set to I10. For a 2V battery, the discharge termination voltage is 1.8V; for a 6V battery, it is 5.25V; and for a 12V battery, the termination voltage is 10.5V. Once any individual cell in the battery pack reaches its specified termination voltage during discharge, the process must be immediately stopped to prevent over-discharge and potential damage.
Throughout three complete charge and discharge cycles, if the measured capacity of the battery pack falls below 100% of its rated capacity, the battery pack is consideredä¸åˆæ ¼ (unqualified) and should not be used. This testing procedure ensures that the battery maintains sufficient performance and reliability over its expected lifespan. It is crucial to follow these guidelines strictly to avoid safety risks and ensure optimal operation of the battery system.
FPV Drone TrueX Frame Overview