This article describes a solar cell phone charger This article refers to the address: http:// The working principle of the circuit is briefly described as follows: Component selection and installation and debugging VT1 requires Icm>0.5A, hEF is 50-100, 2SC2500, 2SC1008, etc., VD1 is a Zener diode with a regulated voltage of 3V.
Led Fish Tank Lights With Remote ADVANTAGE
Our Led Fish Tank Lights With Remote is popular in led market,cause its elegant outlook and its high quality and competitive price.
Item Display
Key Features
1.The lifespan is over 50000 hours,low maintenance costs.
2.Energy conservation,saving over 80% energy than the traditional HPS.
3.High light efficiency,90% of the light will be absorbed by the aquatic plants,while just 8%-10% to the HPS.
4.Build-in cooling system,could solve the heat dissipation excellently.
5.Built-in power supply, CE approved, No setup required, just simpler and safer plugs directly into AC85V-264V, no reflector & ballast needed.
Convenient in using lights at the same time.
Package Include
1 X Free Hanging Kit
1X Free Power Cord
Quality Control systems and after-sales
All the lamps have passed strict quality examination and are packed carefully before shipping.In order that our customers get high quality lamps,we attach importance to every details.
Application
1. coral reef lighting,fish tank lighting,coral reef tank lighting
2. Aquarium Lighting ,aquarium art,aquarium shop,aquarim centre
3. fish bowl lighting,fish lighting,freshwater lighting,saltwater lighting
Our Company
Philizon enjoys a high reputation in grow led lamp and Led Aquarium Light fields throughout Europe and America,Philizon also insists on taking high technology to design the newest&best Led Grow Light and Aquarium Light constantly as the market request. Our R&D team with more than 10 people has rich experience in appearance design, electronic structure,heat dissipation simulation analysis,optical lens design,light control system etc.Most of our hydroponics full spectrum Led Grow Lighting and Led Fish Tank Lights With Remote are private modules,we have 10 more design patent and utility model patent till now.
Trade Terms
Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)
Sample will be delivered within 7 working days.
Discounts are offered based on order quanlityes.
MOQ:sample order are acceptable
Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.
Our products ranges:
Warmly welcome to take a visit on our factory at any time and we will pick you up at the airport in Shenzhen.
Led Fish Tank Lights With Remote Dimmable Led Aquarium Light,Dimmable Aquarium Light,Coral Reef Led Aquarium Light,Dimmable Aquarium Light Led Shenzhen Phlizon Technology Co.,Ltd. , https://www.philizon.com
The triode VT1 is a switching power supply tube, and it is composed of a self-excited oscillation circuit with T1, R1, R3, and C2. After the input power is applied, the current flows through the starting resistor R1 to the base of VT1, turning VT1 on.
After VT1 is turned on, the transformer primary winding Np is added with the input DC voltage, its collector current Ic increases linearly in Np, and the feedback coil Nb generates 3 positive and negative 4 induced voltages, so that VT1 is extremely positive and the emission is extremely negative. Positive feedback voltage, this voltage is injected into the VT1 base current through C2 and R3 to further increase the collector current of VT1, and the positive feedback generates an avalanche process, so that VT1 is saturated and turned on. During the VT1 saturation conduction, T1 stores magnetic energy through the primary winding Np.
At the same time, the induced voltage charges C2. As the C2 charging voltage increases, the VT1 base potential gradually becomes lower. When the base current change of VT1 cannot satisfy its saturation, VT1 exits the saturation region and enters the amplification region.
After VT1 enters the amplification state, its collector current decreases from the maximum value before the amplification state, and a negative voltage of 3 negative and 4 positive is generated in the feedback coil Nb, so that the base current of VT1 decreases, and the collector current decreases accordingly. The feedback once again showed an avalanche, and VT1 quickly closed.
After VT1 is turned off, the energy stored in the transformer T1 is supplied to the load, and the 5 negative and 6 positive voltages generated by the secondary winding Ns are rectified and filtered by the diode VD1, and the DC voltage is obtained on the C3 to charge the mobile phone battery.
When VT1 is cut off, the DC power supply input voltage and the Nb-induced 3 negative and 4 positive voltages are reversely charged to C2 via R1 and R3, and the VT1 base potential is gradually increased to make it re-conduct and flip again to reach saturation state. The circuit repeats the oscillation.
R5, R6, VD2, VT2, etc. form a voltage limiting circuit to protect the battery from being overcharged. Here, the 3.6V mobile phone battery is taken as an example, and its charging limit voltage is 4.2V. During the charging process of the battery, the battery voltage gradually rises. When the charging voltage is greater than 4.2V, the voltage-stabilizing diode VD2 starts to conduct after being divided by R5 and R6, so that VT2 is turned on, and the shunting effect of VT2 reduces the base of VT1. The pole current, which reduces the collector current Ic of VT1, achieves the effect of limiting the output voltage. At this time, the circuit stops charging the battery with a large current, and the battery voltage is maintained at 4.2V with a small current.
The high-frequency transformer T1 should be self-made, using E16 ferrite core, Np with φ0.21 enameled wire wrapped around 26åŒ, Nb with φ0.21 enameled wire wrapped around 8åŒ, Ns with φ0.41 enameled wire wrapped around 15åŒ. When winding, pay attention to the starting end of each coil, so as not to make the circuit not vibrate or the output voltage is abnormal. During assembly, a plastic film with a thickness of about 0.03 mm is placed between the two cores as a core air gap.
The solar panel uses four silicon solar panels with an area of ​​6 cm x 6 cm, and its no-load output voltage is 4V. When the operating current is 40mA, the output voltage is 3V. Since the operating efficiency of the DC converter increases as the input voltage increases, four solar panels are used in series, and the input voltage of the circuit is 12V. Readers can determine the number and method of connection based on the solar panel specifications you can purchase.
The parameters of the other components are shown in Figure 1.
The printed circuit board is shown in Figure 2 and measures 45 x 26 mm2. 
After the installation is completed, the solar panel is connected and placed in the sun. The output voltage of the circuit is about 4.2V when the load is no load. When the no-load output voltage is higher than 4.2V, the resistance of R5 can be appropriately reduced, and vice versa. The resistance of R5. The operating current of the circuit is related to the intensity of sunlight. When it is normal, it is about 40mA. At this time, the charging current is about 85mA.
1. Light using CREE LED chips.
2. Unique technology of Standard module design.
3. Brand new idea,all-round LED optic lens.
4. Increases 15% of the growth.
5. Air-circulation system designed to improve The plants' photosynthesis and growth.
6. Easy Disassembling and Reassembling .
7. Exclusive Design:Checking and indicating defects Automatically.
8. Grow your corals under LEDs
9. Enhance the colors on your fish
LED plant grow lights for agricultural lighting;
LED aquarium lights for fish tanks,corals,saltwater tank,marine tank with reef,coral,sps,lps,fish,etc;