Circuit composed of MAX9812 + MAX4411 to amplify microphone input signal
Terminal block is a kind of accessory product used to realize electrical connection, which is divided into connector category in industry. With the higher degree of industrial automation and the more strict and precise requirements of industrial control, the amount of terminal is increasing. With the development of electronic industry, more and more terminals are used, and there are more and more types.
So each part of the terminal block is very important. For example, hardware, there are all copper, copper, stainless steel and so on.
Terminal Blocks Independent Parts Brass Terminal Block,Brass Earth Terminal,Brass Connector Block,Waterproof Terminal Block Suzhou WeBest Electronics Technology Co.Ltd , https://www.webestet.com
Figure 1. The headphone attenuator / amplifier has a microphone monitoring function to facilitate conversations when wearing headphones.
Headphone amplifier (U1, MAX4411) and microphone amplifier (U2, MAX9812) can be directly powered by 3V battery. In standard mode, both devices are in shutdown mode, consuming extremely low battery current. When you need to talk to other people, just press the momentary switch SW1 to turn on the microphone. This will turn on the bias output of the microphone amplifier and amplify the external sound signal. Connect the amplified signal to the headphone amplifier and inject it into the audio signal of the headphone through resistors R3 and R4. Another benefit provided by this mixing method is that the low output impedance of the headphone amplifier (when turned on) can further attenuate the audio stream of the original headphone channel.
The sensitivity of the monitoring circuit can be adjusted by changing R3 and R4. The attenuation of the audio input can be adjusted by R1 and R2. Microphones, headphone jacks, transient switches, batteries and other circuits can be installed in a keychain-sized box with a 1 meter long cable and headphone plug.