As an intelligent device with both hardware and software, the Android Industrial Tablet Pc has a wider and wider application range in industrial control scenarios. As an industrial big data touch center, tablet computers play an irreplaceable role in industrial transformation. The industrial panel installation is designed for industrial communication, POS, retail and other interactive communications retail and interactive communications. Smart Tablet,Tablet Smart,Smart Tab Tablet,Industrial Tablet Pc Shenzhen Hengstar Technology Co., Ltd. , https://www.angeltondal.com
Figure 1. DS1852 memory map.
DS1852 Alarm and Warning Thresholds and the SFF-8472 StandardThe SFF-8472 standard dictates the requirements for diagnosTIc monitoring interfaces of opTIcal transceivers. The standard requires that the alarm and warning threshold limits of an optical receiver be stored in memory locations 00h through 37h of 2 -wire address A2h. Memory locations 28h through 37h of that range are reserved per the standard.
However, the Alarm and Warning Thresholds of the DS1852 reside at memory locations 80h to A7h (Table 03h), also at 2-wire address A2h. The DS1852 uses the thresholds in these registers to configure the alarm and warning circuitry. Therefore, in order to comply with the standard, the DS1852 Alarm and Warning Thresholds must be copied into the location specified by the standard (see Figure 1). The problem is solved by simply copying the values ​​to the required location solely at the cost of several extra 2- wire transactions during factory calibration / testing. As Figure 1 illustrates, ensure that Level 2 access is obtained before the copy is performed. Likewise, keep in mind that for a particular module if the Alarm and Warning Thresholds are ever changed, both locations must be written to.
ConclusionThe DS1852 Alarm and Warning Thresholds can easily be made to comply with SFF-8472 by copying the values ​​from the DS1852 locations to the SFF-8472 specified locations.
How to Configure the DS1852 Al
Abstract: The purpose of this applicaTIon note is to explain how to configure the DS1852 so that the Alarm and Warning Thresholds comply with the memory locaTIon requirements of the SFF-8472 standard.