At the end of the year, various quality inspection agencies have launched attacks on various products to defend product quality standards. According to the incomplete statistics of LED network, since November, Anhui, Shanghai, Jilin, Henan, Guangxi, Hunan, Shandong, Inner Mongolia, and Jiangsu have all produced the results of lighting products. Anhui Quality Supervision Bureau spot check: the failure rate of lamps is 25% Recently, the Anhui Provincial Bureau of Quality and Technical Supervision recently notified the results of the provincial special supervision and spot check of the “Sword Action†in 2016, and extracted four kinds of products such as wood-based panels, lamps, disposable sanitary products and water purifiers from Anhui production enterprises. 113 groups of samples were taken, 9 groups were unqualified, and the sampling pass rate was 92%. Among them, 20 sets of samples were taken from the lamps, 5 groups were unqualified, and the failure rate was 25%. The unqualified items involved internal wiring, lamp power, and harmonic current. Shanghai LED lighting inspection: the failure rate decreased by 13% Recently, the Shanghai Municipal Administration of Industry and Commerce concentrated on organizing forces to move, fixed and fixed to 25 supermarkets, 10 shopping malls, 9 professional markets and 25 batches in 5 areas of Baoshan, Hongkou, Jing'an, Putuo and Pudong. Embedded LED lamps for market inspection and quality inspection. After testing, there were 3 batches that were unqualified, and the unqualified detection rate was 12%, down 13% year-on-year. The unqualified items are mainly the power terminal disturbance voltage and identification: First, the power terminal disturbance voltage is unqualified, there are 2 batches; the second is that the mark is not standardized, there is 1 batch. Jilin Province Quality and Technical Supervision Bureau: LED lighting products pass rate is 70% Recently, the Quality and Technical Supervision Bureau of Jilin Province organized supervision and spot checks on five types of products, such as rice cookers, which have obtained compulsory product certification and are valid in the state. From the 90 batches of products examined, 78 batches of products were qualified. Among them, the qualification rate of rice cooker is 80%, the pass rate of electric kettle is 90%, the pass rate of LED lighting products is 70%, and the pass rate of fixed socket and air purifier reaches 100%. The Henan Provincial Quality Supervision Bureau randomly checked 7 batches of self-ballasted LED lamp products for general lighting. In the second quarter of 2015, Henan Quality and Quality Monitoring Bureau held a provincial surveillance spot check on the quality of 64 kinds of products such as household paper products (except toilet paper), and released the spot check function on its official website on December 14. Among them, 7 batches of self-ballasted LED lamp products for ordinary lighting produced by 7 enterprises in Zhengzhou, Anyang, Xinxiang, Shangqiu and Jiyuan were sampled. After sampling review, all the 7 batches of products meet the scale requirements. This spot check is based on GB/T24908-2010 "Private lighting for self-ballasted LED lamp function requirements", "2015 ordinary lighting with self-ballasted LED lamp product quality Henan Province monitoring and spot check experimental program", for ordinary lighting with self-ballast The lamp power, power factor, initial luminous efficacy/light flux, color characteristics, harmonics, etc. of the LED lamp were examined. Guangxi Quality Supervision Bureau randomly checked 19 batches of LED lighting products all qualified Recently, the Quality and Technical Supervision Bureau of Guangxi Zhuang Autonomous Region notified the supervision and spot check of the quality of LED lamps in 2016. A total of 19 batches of products produced by three enterprises in the region were selected, mainly in accordance with the “Detailed Rules for the Supervision and Inspection of LED Lamp Product Quality in 2016â€. For the basis of inspection, after inspection, no unqualified products were detected, and the detection rate of unqualified products was 0%. Hunan Provincial Administration for Industry and Commerce sampling 60 groups of lighting products failed to pass 33 groups The Hunan Provincial Administration for Industry and Commerce recently notified the quality inspection of the commodity sector in the circulation in the third quarter of 2016. A total of 60 sets of lighting products were sampled from 33 distribution units in the three regions of Huaihua, Changde and Loudi, and 33 were unqualified. The main problems with unqualified products are marking, grounding regulations, and internal wiring that do not meet the standard requirements. Shandong Provincial Quality Supervision Bureau: 11 batches of explosion-proof lamp products were unqualified, and 8 batches of miners' safety light products were all qualified. It was learned from the official website of Shandong Quality and Technical Supervision Bureau that in the third quarter of 2016, the bureau organized the provincial supervision and spot check on the quality of explosion-proof lamps, and randomly selected 11 batches of products produced by 11 enterprises in the province. Two batches of products failed. According to the Shandong Provincial Bureau of Quality and Technical Supervision, this spot check is based on GB3836.1-2010 "Electrical Equipment for Explosive Gas Environments Part 1: General Requirements", GB 3836.-2010 "Electrical Equipment for Explosive Gas Environments Part 2: Separation Explosive type "d"", GB 3836.3-2010 "Electrical equipment for explosive gas atmospheres - Part 3: Increased safety type "e"", GB3836.4-2010 "Electrical equipment for explosive gas atmospheres - Part 4: Intrinsically safe type" i"", MT221-2005 "explosion-proof lamps for coal mines" and other standards, drawings, data inspection, structural inspection, impact test, introduction device clamping performance test, introduction device sealing performance test, casing pressure test 14 items such as internal ignition non-explosion test, thermal drastic test, outer casing protection level test, spark ignition test, dielectric strength test, insulation resistance test, voltage fluctuation test and joint torsion test were tested. In addition, the bureau organized a provincial supervision and spot check on the quality of miners' safety light products, and randomly selected 8 batches of products produced by 8 enterprises in the province, all of which were qualified. Inner Mongolia Industry and Commerce Bureau: Quality problems of 30 kinds of LED lamp products The Inner Mongolia Autonomous Region Administration for Industry and Commerce recently announced the results of the quality inspection of LED lights in the circulation field in 2016. The quality of 30 kinds of LED lamps has quality problems, mainly due to the fact that the lamp power and harmonics do not meet the relevant standards. For the unqualified goods found in the spot check, the administrative department for industry and commerce has ordered to stop the sale and imposed penalties in accordance with relevant laws and regulations. Any unqualified commodity producers and related dealers shall, in accordance with the requirements of relevant laws and regulations, take the initiative to take measures such as recall, removal, and delisting. If no relevant measures are taken, the industry and commerce department will be in accordance with the Law on the Protection of Consumer Rights and Interests. The provisions of the regulations are investigated and dealt with. Jiangsu Provincial Industry and Commerce Bureau sampled 80 batches of automotive lighting products qualified rate of 85% It was learned from the official website of the Jiangsu Administration for Industry and Commerce that in the first half of 2016, the bureau conducted quality inspections on automobile lighting products in circulation areas in some parts of the province, and a total of 80 batches were inspected. After inspection, 68 batches were qualified. 85%. This test is based on GB4599-2007 "Automotive Filament Bulb Headlights", GB21259-2007 "Automotive Gas Discharge Source Headlights", GB4660-2007 "Automotive Filament Bulb Front Fog Lights", GB11554-2008 "Motor Vehicles" And fog light distribution performance for trailers, GB15235-2007 "lighting performance of car and trailer reversing lights", GB17509-2008 "lighting performance of car and trailer turn signal lights", GB5920-2008 "car and trailer front position lights , rear position light, position light and brake light distribution performance, GB18409-2013 "car parking light distribution performance", GB18099-2013 "car and trailer side marker light distribution performance", GB23255-2009 "car Standard for light distribution performance of daytime running lights, GB15766.1-2008 "Lighting bulb size and photoelectric performance requirements for road motor vehicles", GB4785-2007 "Installation regulations for external lighting and optical signal devices for automobiles and trailers", the test items are Photoelectric parameters, light color and chromaticity characteristics, light distribution performance, working range covers 8 regions including Nanjing, Suzhou, Wuxi, Lianyungang, Yangzhou, Taizhou, Kunshan and Taixing. After testing, a total of 12 batches of goods were judged to be unqualified, and 9 of them were not in compliance with the requirements. The light distribution performance of 4 batches of automotive lamps did not meet the requirements.
Concrete Construction Tools of various types including Sewage Pump,Concrete Pole Transfer Vehicle,Mechanical vibrator,Concrete Mixer,Steel Rod,Hand Drill,which is widely used for concrete manufacturing and concrete pole transfering in power line project,etc.They are specially convinient for outside working.All of them are made of best material with reasonable volume,,easy to operate.By high quality materials and good design,these kind of Concrete Construction Tools can be durable and long service life.we are a professional Chinese exporter of Concrete Construction Tools,and we are looking forward to your cooperation.
Yangzhou Qianyuan Electric Equipment Manufacturing & Trade Co. Ltd is specialized in manufacturing and trade of electric power line transmission tools. Our main products are Anti-twisting Steel Wire Rope,Stringing Pulley,Hydraulic Crimping Compressors,Engine Powered Winch,Motorised Winch,Wire Grip,Gin Pole,Cable Stand,Mesh Sock Grips,Cable Conveyor,Lever Chain Hoists and so on,which are mainly supplied to power companies,railroad companies and other industry fields.
concrete construction tools, concrete mixing machine, sewage pump, vibrating machine, manual drill Yangzhou Qianyuan Electric Equipment Manufacturing & Trade Co.Ltd , https://www.qypowerline.com
To assure the quality, we will do 100% inspection for raw material, production procedure, packing before shipment,
so we do have the confidence to supply customers with high-quality and high-efficiency products.
"Customer satisfaction" is our marketing purposes,so we have extensive experience in professional sales force,and strongly good pre-sale, after-sale service to clients. We can completely meet with customers' requirements and cooperate with each other perfectly to win the market.Sincerely welcome customers and friends throughout the world to our company,We strive hard to provide customer with high quality products and best service.