RF Inductors - Comparison of Mode Coils and Coils

This article describes the comparison of coil mode and coil products.

※ Murata's inductors for RF circuits are called “RF Inductors” and “RF Inductors”.

Why use a chip inductor?

As long as it is low inductance, the function of the inductor can be obtained by drawing a pattern on the circuit substrate. The benefits of using a chip inductor are explained below.

Reason 1. Save space

When the inductance is formed by the pattern on the circuit board (or the inner layer of the circuit board), it is basically a planar configuration.

The chip inductor is a three-dimensional structure and therefore saves space compared to the pattern inductance on the circuit substrate.

※ Especially when an inductor of 10nH or more is required, it can save a lot of space.

RF Inductors - Comparison of Mode Coils and Coils

RF Inductors - Comparison of Mode Coils and Coils

Reason 2. Simple tuning

When impedance matching is performed, the inductance value may be changed multiple times for adjustment.

To change the inductance of a patterned inductor, it is often necessary to change the board so it is difficult to adjust.

The inductance of the chip inductor is very fine, so the matching can be adjusted by replacing the components.

RF Inductors - Comparison of Mode Coils and Coils

Reason 3. Guaranteed characteristics

When the inductance is formed by the pattern on the circuit board, there is a standard deviation of the inductance characteristics due to the standard deviation of the material properties of the board and the standard deviation of the processing accuracy.

The chip inductor is subjected to full inductance sorting at the factory, so that the standard deviation of the inductance value is controlled within a certain range. Therefore, it can contribute to the manufacture of a machine with stable performance.

RF Inductors - Comparison of Mode Coils and Coils

1.HI tech integrated design, put Solar Panel,led light,controller and battery all in one box,without any cable, very easy for shipment , installation and maintenance                                             

2.Eco friendly with Solar power supply             

3.this design is to put high efficiency monocrystalline silicon solar panel,LED lamps,long life Lithum battery and controller all in one box

4.Different power of the light,meet the different requirements used in the road,house or other sites

5.From 15W up to 100W for LED lamps

All-in-one Solar Street Light

Integrated Solar Street Light,Integrated Solar Led Street Light,All In One Solar Led Street Light,Integrated Solar Light

Yangzhou Beyond Solar Energy Co.,Ltd. , https://www.ckbsolar.com