On September 1, 2016, the European Union imposed a ban on certain types of halogen bulbs in accordance with Regulation No. 1194/2012 of the European Commission (hereinafter referred to as the European Commission). This regulation establishes environmental design requirements for directional lighting and other lighting appliances in the EU market. According to EU law, “directional light†refers to a luminaire with at least 80% light output in the solid angle range of “π sr†(equivalent to a cone with a apex angle of 120°). From September 1, 2016, directional lights placed on the EU market must comply with the energy conservation regulations in Table 2 (also referred to as “Phase IIIâ€) of Annex III of Regulation 1194/2012. The “Phase III†regulations are effective as of September 1, 2016 and apply to directional lights that will be placed on the EU market. After the implementation of the regulations, GU10 halogen spotlights and PAR30 halogen floodlights are prohibited from being placed on the market. “In fact, as early as a few years ago, Europe had issued a road map for banned halogen lamps. Every year, halogen lamps with different wattages were banned. So far, many high-power halogen lamps have disappeared in the market, many places. The application has been replaced by LED directional lights." Zhang Hong, general manager of the incentive test, told Gaogong LED. The so-called LED directional lights, in fact, refers to the LED spotlights, LED downlights, etc., currently in the European and American markets have been relatively more applications. Because the price of the old halogen spotlight is cheaper than that of the LED spotlight, it is very popular among consumers. Therefore, it takes a time for the LED directional lamp to completely replace the halogen lamp, and it is not suddenly possible to erupt. In the future, LED directional lights will definitely replace halogen lamps. Zhang Hong believes that "from a legal point of view, halogen lamps will gradually be banned; from a market point of view, once a ban is imposed, halogen lamps will be blocked when they enter the market, so another product must be replaced." In terms of the use of lamps, there are certain differences in foreign methods compared to China. Domestic use of halogen lamps is directly inserted into the lamp head, but the concept of lamps is used abroad, rather than the concept of light source. In their view, it is very troublesome to replace the light source in the lamp with a qualified person to replace it. At present, floodlight-type light source lamps (such as LED bulbs) are used in relatively large applications, and sales in overseas markets are relatively large. LED directional lamps are mainly used in specific fields, so the market share is relatively low. . Li Quan, manager of Sanxiong Aurora Brand Management Center, said that before our LED spotlights and LED downlights were not done in overseas markets, we are now strengthening the layout of products in this field, including channel construction, lighting design, brand promotion, etc. Strive to gain more market share. In recent years, the LED penetration rate of commercial lighting has also increased rapidly. The color of the LED lamp is relatively easy to control, the color temperature is adjustable, the light effect and the index are gradually improved, and it is more and more accepted by commercial users. "The current LED directional lamp structure is more and more simple, the weight is getting lighter, the use of heat dissipation materials is less and less, the power used is getting smaller and smaller, the power supply is becoming more and more miniaturized, and the reliability is getting higher and higher. The corresponding cost is declining. Therefore, the replacement of halogen lamps by LED directional lamps has become an inevitable trend." Zhang Hong introduced. Recently, an LED spotlight launched by LEDVANCE, a subsidiary of Osram, is the first to use a glass material to make a bulb. It will be an ideal replacement for traditional halogen lamps. They have technical breakthroughs in design, materials and dimensions. LEDVANCE will provide a series of glass bulbs such as PAR16 and MR16 LED lamps with a luminous flux of up to 575 lm, a color rendering index (CRI/RA) of over 90 and a service life of up to 40,000 hours. In addition, LEDVANCE will provide glass LED filament lamps that replace halogen reflector lamps, R63 and R80 bulbs. This type of filament light bulb is divided into dimmable and non-dimmable. When dimming, it can replace 60W traditional bulb; when not dimming, it can replace 75W and 100W traditional bulb. The innovation trend of LED lamps is still based on the application field to determine the design. Zhang Hong said, “Now the filament lamp manufacturers are more willing to make the shape of the filament lamp into a traditional incandescent lamp style, which has been designed. Retro art effect." "At present, the lighting application market is in a process of nurturing and needs constant innovation. With the increasing demand for commercial lighting and home lighting, LED product design innovation is even more important. Of course, the market and consumers are ultimately needed. To decide." Li Quan finally mentioned.
Power Meter is a monitoring and testing
instrument which determines the power consumption of a connected
appliance and the cost of the electricity consumed.
Installing the batteries
Install 3.6V rechargeable Battcrics(NI-MH) . The purpose of the batteries is to store the total electricity and mcinory setting.
Resetting
If an abnormal display appears or the
buttons produce no response, the instrument must be reset. To do
this,press the RESET button.
Display Mode
Entire LCD can be displayed for about 1
minute and then it automatically gets into Model. To transfer from one
mode to the other, press the FUNCTION button.
Mode 1: Time/Watt/Cost Display Display
duration(how long) this device connect to power source.LCD on first
line shows 0:00 with first two figures mean minutcs (2 figures will
occur while occur at 10 min) and the rest shows seconds. After 60mins,
it displays 0:00 again with first two numbers meas hour(2 figures will
occur at 10hours) and the rest shows minutes. The rest can be done in
the same manner which means after 24 hours, it will rc-caculatc. LCD on
second line displays current power which ranges in 0.0W~9999W. LCD on
third line displays the current electricity costs which ranges in
0.0cost~9999cost. It will keep on O.OOcost before setting rate without
other figures.
Mode 2: l ime/Cumulative electrical quantity Display Display duration(how long) this device connect to power source.
LCD on first line shows 0:00 with first
two figures mean minutes(2 figures will occur while occur at 10 min) and
the rest shows seconds. After 60mins, it displays 0:0() again with
first two numbers meas hour(2 figures will occur at 10hours)and the rest
shows minutes. The rest can be done in the same manner which means
after 24 hours, it will re-caculate. LCD on second line displays current
cumulative electrical quantity which ranges in 0.000K WH 〜 9999KWII
without other figures. LCD on third line displays''DAY''- "1 "will be
showed on numerical part(thc other three
figures will be showed at carry) which means it has cumulated
electrical quantity for 24hours(one day). The rest can be done in the
same manner untial the maximal cumulative time of 9999 days.
Mode 3: Time/Voltage/Frequency Display
LCD on first line displays the same as Mode 1 dones. LCD on second line
displays current voltage supply (v) which ranges in 0.0V~9999V .LCD on
third line displays current frequency (HZ) which ranges in 0.0HZ~9999HZ
without other figures.
Mode 4: Time/Current/Power Factor Display LCD on first line displays the same as Mode 1 dones.
LCD on second line displays load current
which ranges in 0.0000A~9999A. LCD on third line displays current power
factor which ranges in 0.00PF 〜 1 .OOPF without other figures.
Mode 5:Time/Minimum Power Display LCD on first line displays the same as Mode 1 clones. LCD on second
line displays the miniinum power which ranges in 0.0W~9999W. LCD on
third line displays character of "Lo" without other figures.
Mode 6: I,ime/Maximal Power Display LCD on first line displays the same as Mode 1 dones. LCD on second line
displays the maximal power which ranges in 0.0W~9999W. LCD on third
line displays character of "Hi" without other figures.
Mode 7: Time/Price Display LCD on first line displays the same as Mode 1 dones. LCD on third line
displays the cost which ranges in O.OOCOST/KWH 〜 99.99COST/KWH without
other figures. Power Meter Double Rates, Power Meter Two Rates, Cost Rate Socket, Power Meter Cost Rate, Energy Meter Cost Rate, Cost Socket, Cost Plug NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsockets.com
Overload Display: When the power socket connects the load over 3680W, LCD on second line
displays the"O VER LOAD" with booming noise to warn the users,( 1918935, 60470643,
60469303,selectable choice)
Supplemental informations:
1: Except tt OVERLOAD , ' interface, LCD on first line display time in repitition within 24hours.
2: LCD on first line, second line or third
line described in this intruction take section according to two black
lines on LCD screen. Here it added fbr clarified purpose.
3. Mode 7 will directly occur while press down button "cost".
4. [UP"&''Down" are in no function under un-setting mode.
Backlight Mode:
Connect to AC power,backlight im mediately light,if not press any button,backlight will went off in 15 seconds.
When press any of the buttonsbacklight
start light again. (Backlight only light when it connect to AC
power,backlight cannot light if use battery)
Setting Mode
1. Electricity price setting
After keeping COST button pressed lasting
more than 3 seconds(LCD on third line display system defaults price, eg
O.OOCOST/KWH ),the rendered content begins moving up and down which
means that the device has entered the setting mode. Then press FUNCTION
button to change selection and press UP/DOWN to set what you want. (On
pressing once, the figure after domical point will increase or decrease
accordingly. On pressing and hold-on, figures after demical point will
increase or decrease slowly in 2 seconds while figures change quickly
when hold-on time exceeds 2 seconds. When hold-on time reaches 10
seconds or more, the figures after demical point will stop while the
figures before demical point begin to increasing or decreasing.) After
that, press FUNCTION fbr swithing, then press [UP'nd "DOWN" button again
to set value which ranges in OO.OOCOST/KWH 〜 99.99COST/KWH. After
setting all above, press COST to return to Mode7 or it will
automatically return to Mode7 without any pressing after setting with data storage.