Floor lamp maintenance procedures

The key step in the maintenance of floor lamps is moisture protection. Whether they are placed in the living room, or in the lighting of bathrooms, bathrooms, or kitchen front lamps, moisture-proof lampshades must be installed to prevent moisture intrusion, and to cause rust damage or short circuits in the lamps.

When cleaning and maintenance, first disconnect the power supply, and be careful not to change the structure of the lighting. Do not replace the parts of the lighting. After cleaning and maintenance, the lighting should be installed as it is. Don't miss the wrong installation. Parts to avoid danger.

Lighting wipes can be divided into several situations: 1. Normally clean the dust with a clean feather duster, and be very careful. 2, if the non-metallic floor lamp can be wiped clean with a damp cloth, be careful not to wipe the power cord. 3, if the metal lighting can be wiped with a dry cloth, do not touch the water.

When using lighting, try not to switch as often as possible. Because the current of the lighting is frequently activated, the current through the filament is greater than the current during normal operation, so that the filament temperature rises sharply to accelerate sublimation, which will greatly reduce its service life. Pay attention to all lighting maintenance.