ACSR, Aluminium Conductors Steel Reinforced (ASTM B 232)

ACSR, Aluminium Conductors Steel Reinforced (ASTM B 232)

Applications
ACSR have been widely used in power transmission lines with various voltage levels, because they have such good characteristics as simple structure, convenient installation and maintenance, low cost large transmission capacity. And they are also suitable for laying across rivers valleys and the places where special geographical features exist.

Service Performance

(1). The permissible long-time operating temperature for aerial conductor is 70oC.

(2). Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area, the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
(3). When connecting conductors, the conductor beside the connecting tube cant be prominent. Otherwise, the force on the operating conductors will be unbalanced. After connectors are install, the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.
(4). Under installaion, the arc downing stress of all the conductors should be the same. With in the permissible distance of crossing buildings or dropping to the ground, the stress can be 10-15% higher than regular stress.

Product Performance
(1). The electrical performance of AAC and ACSR is indicated in DCΩ /km(20oC). The resistivity of the hard aluminum wire for stranded wires is not greater than 28.264 nΩ . M of international standard value.
(2). The rated tensile strength of AAC is denoted with the result of total cross-section of all aluminum conductors multiplied by min. Tensile of corresponding size specified in the standard for aluminum wire.
(3). The rated tensile strengh of ACSR is denoted with sum of all aluminum conductorstensile strength and steels tensile strength.
A. The tensile strength of all aluminum conductors is denoted with the result of all cross-sections of aluminum conductors multiplied by min. Tensile strength of corresponding size specified in the standard for aluminum wire.
B. The tensile strength of all steel wire is denoted with the result of all cross-sections of steel wires multiplied by the stress at 1% elongation of corresponding size specified in the standard for steel wire.

Referred Standards
BoanCable is able to manufacture ACSR according to different stands, as below:
(1). ASTM B 232/B 232M:Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
(2). AS 3607:Conductors-Bare overhead, aluminium and aluminium alloy-Steel reinforced
(3). IEC 61089:Round wire concentric lay overhead electrical conductors
(4). DIN 48.204:Steel reinforced aluminium stranded conductor
(5). BS 215-2:Aluminium conductors and aluminium conductors, steel-reinforced-For overhead power transmission-Part 2:Aluminium conductors, steel-reinforced
(6). BS EN 50182:Conductors for overhead lines-Round wire concentric lay stranded conductors
(7). Production can be arranged according to customers requirements' for material standard, etc.




 

ACSR, Aluminium Conductors Steel Reinforced (ASTM B 232)

Applications
ACSR have been widely used in power transmission lines with various voltage levels, because they have such good characteristics as simple structure, convenient installation and maintenance, low cost large transmission capacity. And they are also suitable for laying across rivers valleys and the places where special geographical features exist.

Service Performance

(1). The permissible long-time operating temperature for aerial conductor is 70oC.

(2). Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area, the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
(3). When connecting conductors, the conductor beside the connecting tube cant be prominent. Otherwise, the force on the operating conductors will be unbalanced. After connectors are install, the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.
(4). Under installaion, the arc downing stress of all the conductors should be the same. With in the permissible distance of crossing buildings or dropping to the ground, the stress can be 10-15% higher than regular stress.

Product Performance
(1). The electrical performance of AAC and ACSR is indicated in DCΩ /km(20oC). The resistivity of the hard aluminum wire for stranded wires is not greater than 28.264 nΩ . M of international standard value.
(2). The rated tensile strength of AAC is denoted with the result of total cross-section of all aluminum conductors multiplied by min. Tensile of corresponding size specified in the standard for aluminum wire.
(3). The rated tensile strengh of ACSR is denoted with sum of all aluminum conductorstensile strength and steels tensile strength.
A. The tensile strength of all aluminum conductors is denoted with the result of all cross-sections of aluminum conductors multiplied by min. Tensile strength of corresponding size specified in the standard for aluminum wire.
B. The tensile strength of all steel wire is denoted with the result of all cross-sections of steel wires multiplied by the stress at 1% elongation of corresponding size specified in the standard for steel wire.

Referred Standards
BoanCable is able to manufacture ACSR according to different stands, as below:
(1). ASTM B 232/B 232M:Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
(2). AS 3607:Conductors-Bare overhead, aluminium and aluminium alloy-Steel reinforced
(3). IEC 61089:Round wire concentric lay overhead electrical conductors
(4). DIN 48.204:Steel reinforced aluminium stranded conductor
(5). BS 215-2:Aluminium conductors and aluminium conductors, steel-reinforced-For overhead power transmission-Part 2:Aluminium conductors, steel-reinforced
(6). BS EN 50182:Conductors for overhead lines-Round wire concentric lay stranded conductors
(7). Production can be arranged according to customers requirements' for material standard, etc.




 

Outdoor CPE

An Outdoor CPE (Customer Premises Equipment) is a client device used in outdoor environments, typically for wireless network connectivity. It is a device used to transmit Internet signals from a service provider to the user's location.

Outdoor CPE is commonly used to provide broadband access services, especially in remote areas or places without traditional wired network coverage. It can transmit an Internet connection via wireless signals to the building or area where the user is located. Outdoor CPE is typically a highly protected and durable device designed to handle harsh weather conditions in an outdoor environment.

Outdoor Cpes typically include the following main components:

1. Antenna: Outdoor CPE is usually equipped with a high-gain antenna for receiving and sending wireless signals. These antennas can be designed for different frequency bands and wireless standards.

2. Wireless module: Outdoor CPE usually includes a wireless module to handle the transmission and reception of wireless signals. This module usually supports different wireless standards such as Wi-Fi, LTE, 4G, etc.

3. Router function: Outdoor CPE usually has the function of a router, which can distribute the Internet connection to the device where the user is. It can provide IP address allocation, port forwarding, network security and other functions in the local area network.

4. Power supply and battery: Since Outdoor CPE is usually used in outdoor environments, it usually requires a reliable power supply. Some Outdoor Cpes are also equipped with batteries to provide continuous Internet connectivity in the event of a power outage.

The main features and advantages of Outdoor CPE are as follows:

1. High-speed broadband access: Outdoor CPE can provide high-speed broadband access services through wireless signals, so that users can enjoy high-speed Internet connections in places without traditional wired network coverage.

2. Flexibility: Since Outdoor CPE is a wireless connection, it can be used in different locations and environments. Users can place the Outdoor CPE in the best position as needed for optimal signal coverage and performance.

3. Simple installation: Outdoor CPE usually has a simple installation process, and users only need to place the device outdoors and make some basic Settings to start using the Internet connection.

4. Strong anti-interference ability: Outdoor CPE usually has strong anti-interference ability and can provide stable Internet connection under harsh environmental conditions. It can cope with various sources of interference, such as electromagnetic interference, weather conditions and so on.

5. High reliability: Outdoor CPE usually has a high degree of reliability and durability, and can be operated for a long time in a variety of outdoor environments. It usually has waterproof, dustproof, lightning-proof and other functions to cope with different weather conditions.

Outdoor CPE is widely used in a variety of scenarios, especially in rural areas, mountains, islands and other places without traditional cable network coverage. It can provide high-speed broadband access services to residents and enterprises in these areas, helping them to enjoy the convenience of the Internet.

In summary, the Outdoor CPE is a client device for outdoor environments to provide high-speed broadband access services via wireless signals. It is highly reliable, flexible and anti-jamming, and can provide a stable Internet connection in a variety of outdoor environments. It plays an important role in providing broadband access services, especially in places without traditional wired network coverage.

Outdoor Cpe,Router 4G Outdoor,4G Router Bridge Cpe,300Mbps Wifi Ap Outdoor 4G Lte Cpe

Shenzhen MovingComm Technology Co., Ltd. , https://www.movingcommiot.com