Control bit component when touch screen numerical input - Database & Sql Blog Articles

Probe domestic switch needle KG-300K needle head diameter is 3.0mm normally open switch needle

Taking the Mitsubishi touch screen as an example, the touch screen controls the bit elements during numerical input, and there are two cases.
One is: the touch screen can control the two bit actions while pressing the ENTER in the keyboard with the numerical input, and can be realized by a “numeric input” component. When the bit component is controlled, the “value input” is only required. "Write end device" can be set in the option".
The other is: to achieve control of other bit components immediately when the value input is pressed, the following steps can be achieved
1. Create two separate screens, each with a “bit switch” and “numeric input” switch
2. The screen for placing the "Bit Switch" and "Numerical Input" switches is called twice in the screen for controlling other bit components as soon as the numerical value input is pressed.
3. Adjust the two screens called to overlap
4. Note that the screen where the "value input" is placed is placed at the bottom.